Automotive Electromagnetic Compatibility (EMC) Test Standards

Automotive Electromagnetic Compatibility (EMC) Test Standards

United Nations

Document Number Title

• UNECE R10 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

CISPR (Automotive Emissions Requirements)

Document Number Title

• CISPR 12 Vehicles, boats, and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
• CISPR 25 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement
• CISPR 36 Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

ISO (Automotive Immunity Requirements)

Document Number Title

• ISO 7637-1 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations
• ISO 7637-2 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only
• ISO 7637-3 Road vehicles -- Electrical disturbance by conduction and coupling -- Part 3: Vehicles with nominal 12 V or 24 V supply voltage -- Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
• ISO/TR 10305-1 Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz
• ISO/TR 10305-2 Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
• ISO 10605 Road vehicles -- Test methods for electrical disturbances from electrostatic discharge
• ISO/TS 14907-1 Road transport and traffic telematics -- Electronic fee collection -- Test procedures for user and fixed equipment -- Part 1: Description of test procedures
• ISO/TS 14907-2 Road transport and traffic telematics -- Electronic fee collection -- Test procedures for user and fixed equipment -- Part 2: Conformance test for the onboard unit application interface
• ISO 21498-1 Electrically Propelled Road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 1: Voltage sub-classes and characteristics
• ISO 21498-2 Electrically Propelled Road vehicles -- Electrical specifications and tests for voltage class B systems and components -- Part 2: Electrical tests for components
• ISO/TS 21609 Road vehicles -- (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
• ISO 11451-1 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology
• ISO 11451-2 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources
• ISO 11451-3 Road vehicles -- Electrical disturbances by narrowband radiated electromagnetic energy -- Vehicle test methods -- Part 3: On-board transmitter simulation
• ISO 11451-4 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
• ISO 11452-1 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology
• ISO 11452-2 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
• ISO 11452-3 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell
• ISO 11452-4 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
• ISO 11452-5 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline
• ISO 11452-7 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection
• ISO 11452-8 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields
• ISO 11452-10 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range
• ISO 11452-11 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 11: Reverberation chamber
• ISO 13766-1 Earth-moving and building construction machinery -- Electromagnetic compatibility (EMC) of machines with internal electrical power supply -- Part 1: General EMC requirements under typical electromagnetic environmental conditions
• ISO 13766-2 Earth-moving and building construction machinery -- Electromagnetic compatibility (EMC) of machines with internal electrical power supply -- Part 2: Additional EMC requirements for functional safety

SAE (Automotive Emissions and Immunity)

Document Number Title

• J1113/1 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (Up to 15 M), and Machines (Except Aircraft) (50 Hz to 18 Ghz)
• J1113/4 Immunity to Radiated Electromagnetic Fields-Bulk Current Injection (BCI) Method
• J1113/11 Immunity to Conducted Transients on Power Leads
• J1113/12 Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than Supply Lines
• J1113/13 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge
• J1113/26 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields
• J1113/27 Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27: Immunity to Radiated Electromagnetic Fields - Mode Stir Reverberation Method
• J1752/1 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits-Integrated Circuit EMC Measurement Procedures-General and Definition
• J1752/2 Measurement of Radiated Emissions from Integrated Circuits -- Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
• J1752/3 Measurement of Radiated Emissions from Integrated Circuits -- TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz)
• J551/15 Vehicle Electromagnetic Immunity--Electrostatic Discharge (ESD)
• J551/16 Electromagnetic Immunity - Off-Vehicle Source (Reverberation Chamber Method) - Part 16 - Immunity to Radiated Electromagnetic Fields
• J551/17 Vehicle Electromagnetic Immunity -- Power Line Magnetic Fields
• J1812 Function Performance Status Classification for EMC Immunity Testing
• J2628 Characterization--Conducted Immunity
• J2556 Radiated Emissions (RE) Narrowband Data Analysis--Power Spectral Density (PSD)

GM

Document Number Title

• GMW3091 General Specification for Vehicles, Electromagnetic Compatibility (EMC)
• Supersedes GMI 12559 R and GMI 12559 V
• GMW3097 General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility
• Supersedes GMW12559, GMW3100, GMW12002R AND GMW12002V

Ford

Document Number Title

• FMC1278 Electromagnetic Compatibility Specification For Electrical/Electronic Components and Subsystems
• FMC1279 EMC Processes
• FMC1280 Electromagnetic Compatibility Specification For HV E/E Components and Subsystems

Chrysler

Document Number Title

• DC-10615 Electrical System Performance Requirements for Electrical and Electronic Components
• DC-11224 EMC Performance Requirements -- Components
• DC-11225 EMC Supplemental Information and Alternative Component Requirements
• DC-11223 EMC Performance Requirements -- Vehicle

Other Automotive Manufacturers

• Audi TL 82466 Electrostatic Discharge
• BMW 600 13.0 Electric- / Electronic components in cars
• BMW GS 95002 Electromagnetic Compatibility (EMC) Requirements and Tests
• BMW GS 95003-2 Electric- / Electronic assemblies in motor vehicles
• Chrysler PF 9326 Electrical electronic modules and motors
• FIAT 9.90110 Electric and electronic devices for motor vehicles
• Freightliner 49-00085 EMC requirements
• Honda 3838Z-S5AA-L000 Noise Simulation Test
• Honda 3982Z-SDA-0030 EMC requirements
• Hyundai/Kia ES 39110-00 EMC requirements
• Hyundai/Kia ES-95400-10 Battery Simulation Tests
• Hyundai/Kia ES 96100-01 EMC requirements
• IVECO 16-2103 EMC requirements
• Jaguar / Land Rover JLR-EMC-CS v1.0 Electromagnetic Compatibility Requirements for Electrical/Electronic Components and Subsystems
• Lotus 17.39.01 Lotus Engineering Standard: Electromagnetic Compatibility
• Mack Trucks 606GS15 EMC requirements
• MAN 3285 EMC requirements
• Mazda MES PW 67600 Automobile parts standard (electronic devices)
• Mercedes A 211 000 42 99 Instruction specification of test method for E/E-components
• Mercedes AV EMV Electric aggregate and electronics in cars
• Mercedes MBN 10284-2 EMC requirements and tests of E/E-systems (component test procedures)
• Mercedes MBN 22100-2 Electric / electronic elements, devices in trucks
• Mitsubishi ES-X82010 General specification of environment tests on automotive electronic equipment
• Nissan 28400 NDS03 Low frequency surge resistance of electronic parts
• Nissan 28400 NDS07 Immunity against low frequency surge (induction surge) of electronic parts
• Nissan 28401 NDS02 EMC requirements (instruction concerning vehicle and electrical ...)
• Porsche AV EMC EN EMC requirements
• PSA B21 7090 EMC requirements (electric and electronics equipment)
• PSA B21 7110 EMC requirements (electric and electronics equipment)
• Renault 36.00.400 Physical environment of electrical and electronic equipments
• Renault 36.00.808 EMC requirements (cars and electrical / electronic components)
• Scania TB1400 EMC requirements
• Scania TB1700 Load Dump Test
• Smart DE10005B EMC requirements (electric aggregate and electronics in cars)
• Toyota TSC7001G Engineering standard (electric noise of electronic devices)
• Toyota TSC7001G-5.1 Power Supply Voltage Characteristic Test
• Toyota TSC7001G-5.2 Field Decay Test
• Toyota TSC7001G-5.3 Floating Ground Test
• Toyota TSC7001G-5.4 Induction Noise Resistance
• Toyota TSC7001G-5.5.3 Load Dump Test-1
• Toyota TSC7001G-5.5.4 Load Dump Test-2
• Toyota TSC7001G-5.5.5 Load Dump Test-3
• Toyota TSC7001G-5.6 Over Voltage Test
• Toyota TSC7001G-5.7.3 Ignition Pulse (Battery Waveforms) Test-1
• Toyota TSC7001G-5.7.4 Ignition Pulse (Battery Waveforms) Test-2
• Toyota TSC7001G-5.8 Reverse Voltage
• Toyota TSC7006G-4.4.2 Wide Band-Width Antenna Nearby Test (0.4 to 2 GHz)
• Toyota TSC7006G-4.4.3 Radio Equipment Antenna nearby Test (28 MHz ...)
• Toyota TSC7006G-4.4.4 Mobile Phone Antenna Nearby Test (835 MHz ...)
• Toyota TSC7018G Static Electricity Test
• Toyota TSC7025G-5 TEM Cell Test (1 to 400 MHz)
• Toyota TSC7025G-6 Free Field Immunity Test (20 MHz to 1 GHz AM, 0.8 to 2 GHz PM)
• Toyota TSC7025G-7 Strip Line Test (20 - 400 MHz)
• Toyota TSC7026G-3.4 Narrow Band Emissions
• Toyota TSC7203G Voltage Drop / Micro Drops
• Toyota TSC7508G-3.3.1 Conductive Noise in FM and TV Bands
• Toyota TSC7508G-3.3.2 Conductive noise in LW, AM and SW Bands
• Toyota TSC7508G-3.3.3 Radiated Noise in FM and TV Bands
• Toyota TSC7508G-3.3.4 Radiated Noise in AM, SW, and LW Bands
• Toyota TSC7203G Engineering standard (ABS-TRC computers)
• Toyota TXC7315G Electrostatic Discharge (Gap Method)
• Visteon ES-XU3F-1316-AA Electronic Component - Subsystem Electromagnetic Compatibility (EMC) Requirements and Test Procedures
• Volvo EMC Requirements EMC requirements for 12V and 24V systems
• Volkswagen VW TL 801 01 Electric and electronic components in cars
• Volkswagen VW TL 820 66 Conducted Interference
• Volkswagen VW TL 821 66 EMC requirements of electronic components - bulk current injection (BCI)
• Volkswagen VW TL 823 66 Coupled Interference on Sensor Cables
• Volkswagen VW TL 824 66 Immunity Against Electrostatic Discharge
• Volkswagen VW TL 965 Short-Distance Interference Suppression

更多关于汽车电子EMC电磁兼容技术交流

https://www.emc.wiki/thread-6317-1-1.html