Canada IC

Innovation, Science and Economic Development (ISED)

什么是Canada IC

加拿大IC是加拿大工业部Industry Canada的简称，作为政府机构，它规定了模拟和数字终端设备的检测标准， 负责电子电器产品进入加拿大市场的认证事务，规定进口电子产品必须通过的有关EMC的认证。其管控产品大致为广播电视设备、信息技术设备、无线电设备、电信设备、工科医设备等，与美国FCC、中国CCC相似IC目前只有在电磁干扰上做限制。

加拿大IC标准

Interference-Causing Equipment Standards产生干扰的设备标准

ICES-Gen — General Requirements for Compliance of Interference-Causing Equipment-关于干扰设备合规性的一般要求 Issue 1, July 2018

ICES-001 — Industrial, Scientific and Medical (ISM) Radio Frequency Generators-工业，科学和医疗（ISM）射频发生器 Issue 4, June 2006 Updated in November 2014

ICES-002 — Vehicles, Boats and Other Devices Propelled by an Internal Combustion Engine, Electrical Means or Both -内燃机驱动的车辆，船舶和其他设备，电气方式或两者 Issue 6, March 2013 Updated in November 2014 Updated in February 2017 Updated

ICES-003 — Information Technology Equipment (Including Digital Apparatus) — Limits and Methods of Measurement-信息技术设备（包括数字设备） - 限值和测量方法 Issue 6, January 2016 (updated April 2019)

ICES-004 — Alternating Current High Voltage Power Systems-交流高压电力系统 Issue 4, June 2013

ICES-005 — Lighting Equipment-照明设备 Issue 5, December 2018

ICES-006 — AC Wire Carrier Current Devices (Unintentional Radiators)-交流有线载流子设备（无意散热器） Issue 3, July 2018

ICES-008 — Cable Distribution Networks-电缆分配网络 Issue 1, June 2015 Date modified: 2018-12-17

加拿大IC认证覆盖的产品

包含：

• IT类
• 音视频AV类
• 大家电
• 小家电
• 灯具
• 工医科
• 机械
• 仪器
• USP电源
• 无线类

加拿大认证铭牌要求

• 普通类产品：

需要在铭牌打上如下类似（不同产品会有差），以IECS-003为例子：

CAN ICES-3 (*)/NMB-3(*)

上述*号的话，用A or B代替，A就是工业类产品，B就是家庭消费类，分别看客户做的哪个等级

• 无线类产品：

需要在铭牌上打上获得的无线认证IC号码

Labelling Requirements

The manufacturer, importer or supplier shall meet the labelling requirements set out in this section and in Notice 2014‑DRS1003 for electronic labelling for every unit:

prior to marketing in Canada, for ITE manufactured in Canada and prior to importation into Canada, for imported ITE.

Each unit of an ITE model shall bear a label (see below) that represents the manufacturer’s or the importer’s SDoC with Innovation, Science and Economic Development Canada’s ICES‑003. This label shall be permanently affixed to the ITE or displayed electronically and its text must be clearly legible. If the dimensions of the device are too small or if it is not practical to place the label on the ITE and electronic labelling has not been implemented, the label shall be, upon agreement with Innovation, Science and Economic Development Canada, placed in a prominent location in the user manual supplied with the ITE. The user manual may be in an electronic format and must be readily available.

Innovation, Science and Economic Development Canada ICES‑003 Compliance Label: CAN ICES-3 (*)/NMB-3(*)

• Insert either “A” or “B” but not both to identify the applicable Class of ITE.

加拿大认证方式

加拿大与美国通常合为北美认证，可以参考美国FCC SDOC、FCC ID类似。

• 通产品，FCC SDOC相同，可以采用自我验证宣告，往往与FCC SDOC一起写在一份报告里面。

• 无线产品，FCC ID相同，必须认可的NVLAP、A2LA等无线认可的无线实验室，出具无线报告，然后再找TCB进行发证书。

加拿大IC官方网站

https://www.canada.ca