IEC 61326-3-1

用于测量、控制和实验室的电气设备 - EMC要求 - 第3-1部分：安全相关系统和用于执行安全相关功能（功能安全）的设备抗扰度要求 - 一般工业应用

标准规范引用

IEC 61326-1, Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

IEC 61000-6-2, Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments

IEC 61326-3-2, Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment

IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

IEC 61000-4-3:2020, Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

IEC 61000-4-5:2014+AMD1:2017 CSV Consolidated version, Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

IEC 61000-4-6:2013, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

IEC 61000-4-8:2009 RLV Redline version, Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

IEC 61000-4-11:2020 RLV Redline version, Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

IEC 61000-4-16:2015, Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

IEC 61000-4-29:2000 , Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

IEC 61000-4-34:2005+AMD1:2009 CSV Consolidated version, Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

测试项目

• Table 2 一 Immunity test requirements 一 Enclosure port
• Table 3 - Immunity test requirements 一 Input and output AC power ports
• Table 4 - Immunity test requirements 一 Input and output DC power ports
• Table 5 一 Immunity test requirements - I/O signal/control ports
• Table 6 - Immunity test requirements - I/O signal/control ports connected direct to power supply networks
• Table 7 - Immunity test requirements - Functional earth port
• Table 8 一 Frequency ranges of mobile transmitters and ISM equipment for tests with electromagnetic fields
• Table 9 - Frequency ranges of mobile transmitters and ISM equipment for the conducted RF tests

标准下载与讨论

https://www.emc.wiki/thread-5445-1-1.html