曾工致力于各类电子电器产品的国际国内认证、EMC整改，欢迎各位询价，提供专业服务，解决客户痛点！专治各种产品不合格！
电话：139 2899 3907 邮箱：info@emc.wiki

“The United States Approval”的版本间差异

来自认证百科
 
第15行： 第15行：


== FCC SDoC和FCC ID比较区别 ==
== FCC SDoC和FCC ID比较区别 ==
{| class="wikitable"
{| class="wikitable"
|+ 标题文本
|+ FCC SDoC和FCC ID比较区别
|-
|-
! 标题文本 !! FCC SDoC !! FCC ID
!   !! FCC SDoC !! FCC ID
|-
|-
| 适用产品 || 示例 || 示例
| 适用产品 || 普通不带无线功能产品,如显示屏，灯具等 || 带无线功能产品，如手机，蓝牙耳机等
|-
|-
| 示例 || 示例 || 示例
| 测试内容 || 电磁兼容EMC || 电磁兼容EMC+射频RF
|-
|-
| 示例 || 示例 || 示例
| 认证费用 || 低 || 高
|-
|-
| 示例 || 示例 || 示例
| 测试周期 || 时间短 || 时间长
|-
| 示例 || 示例 || 示例
|}
|}


2022年12月1日 (四) 15:27的最新版本

美国FCC认证

FCC全称是Federal Communications Commission，中文为美国联邦通信委员会。于1934年由COMMUNICATIONACT建立，是美国政府的一个独立机构，直接对国会负责。FCC通过控制无线电广播、电视、电信、卫星和电缆来协调国内和国际的通信。涉及美国50多个州、哥伦比亚以及美国所属地区为确保与生命财产有关的无线电和电线通信产品的安全性，FCC的工程技术部负责委员会的技术支持，同时负责设备认可方面的事务。许多无线电应用产品、通讯产品和数字产品要进入美国市场，都要求FCC的认可。

美国

制定产品要求与法规的目的是为了降低受伤风险、提高生活质量，确保使用过程中的安全性。绝大多数进入美国市场的产品都必须满足有关当局的要求，具体取决于产品范围。

对于电气产品而言，必须由审批通过的全国认可测试实验室（NRTL）开展电气安全测试工作。国家认可检测实验室（NRTL）与医疗有关的产品必须满足美国食品药品管理局（FDA）的相关要求。联邦通信委员会（FCC）法规适用于无线通信设备，环保产品应满足美国能源部（DOC）要求。

认证类型

美国联邦通信委员会FCC在2017年11月2日，将DoC和Verification合并为SDoC（Supplier’s Declaration of Conformity），SDoC认证将取代FCC Verification和DoC认证程序，所有适用于FCC Verification和DoC认证程序的设备均可采取SDoC认证程序。

FCC针对电子产品的类型分为两种不同的认证方式，分别为：FCC SDoC和 FCC ID（Certification） ，前者适用于普通不带无线功能产品，后者适用带无线功能的产品。

FCC SDoC和FCC ID比较区别

FCC SDoC和FCC ID比较区别
FCC SDoC FCC ID
适用产品 普通不带无线功能产品,如显示屏，灯具等 带无线功能产品，如手机，蓝牙耳机等
测试内容 电磁兼容EMC 电磁兼容EMC+射频RF
认证费用 低 高
测试周期 时间短 时间长

美国认证

  • NRTL认证
  • ACTA 审批
  • FCC审批
  • EnergyGuide标签
  • MEPS
  • 加州RoHS合规

美国插头类型

美国插头类型A

美国插头类型A

美国插头类型B

美国插头类型B

美国电气安全

监管机构:职业安全与健康管理局（OSHA）

法规

安全标准要求通过OSHA认可的国家认可测试实验室（NRTL）对产品进行测试和认证。

在适用情况下，需要进行产检。

符合CSA, UL和/或IEC标准。

指导

虽然不是强制性认证，但强烈建议通过产品认证以达到市场营销的目的。 制造商可在通过认证的产品上加贴NRTL标志。认证通过的产品会公布在NRTL发布的“产品清单”中。

美国电磁兼容EMC FCC

监管机构 ：联邦通信委员会（FCC）

法规

CFR第47章节第15部分和第18部分中规定的部分产品需要提供制造商声明。 家用电器不在覆盖范围内。

指导

DOC流程

  • 在认可的测试实验室测试产品的合规性。
  • 编写技术文档。
  • 在产品上加贴标志，并在《用户手册》当中声明必要的FCC通知。

认证流程

  • 在通讯认证机构开展产品测试工作。
  • 将测试报告连同其他必要文件以及拟建FCC ID编号提交给FCC。
  • 在产品上标注FCC ID编号和合规声明，并在《用户手册》当中声明必要的FCC通知。

适用产品类别

常见无意辐射体包括个人计算机、外围设备、接收器、无线电、电视机和家用终端有线电视。有意辐射体包括电缆定位设备、无线电话、遥控和报警发射器、用于开门的现场扰动传感器以及用于宽带数据传输的扩频系统。

如欲确定具体产品是否需要满足上述法规，请与我们联系。

美国无线电FCC ID

监管机构 ：联邦通信委员会（FCC）

法规

需要符合CFR第15部分规定的要求，包括由认可的测试实验室开展测试工作。 需要通讯认证机构出具DoC申明或认证。

一般指南

  • 无意辐射体需要有DoC申明或认证。
  • 有意辐射体需要获得认证。

DOC流程

  • 在认可的测试实验室测试产品的合规性。
  • 编写技术文档。
  • 在产品上加贴标志，并在《用户手册》当中显示FCC通知。
  • 编写并签署DoC。

认证流程

  • 在通讯认证机构开展产品测试工作。
  • 将测试报告连同其他必要文件以及拟建FCC ID编号提交给FCC。
  • 在产品上标注FCC ID编号和合规声明，并在《用户手册》当中声明必要的FCC通知。

美国环境保护

监管机构 能源部（DOE）

法规

  • 能效

众多产品都需要满足最低能源性能标准（MEPS）。 某些具体产品需要加贴强制性能源指导标签。

  • ROHS

《 2003年电子废物再生法案》中的加利福尼亚RoHS适用。

指导

  • 制造商必须向能源部（DOE）提交能源使用数据和以及向FTC陈述其产品符合规定。推出新型号或停用现有型号时须通知DOE和FTC。
  • 关于EnergyGuide标签的信息必须以能源部（DOE）测试程序为基础。

适用产品类别

需要进行强制性加标的产品类别包括：

  • 镇流器
  • 冷冻柜
  • 热水器
  • 加热器
  • 荧光灯
  • 室内空调
  • 洗衣机
  • 冰箱
  • 中央空调
  • 热泵
  • 锅炉
  • 炉子
  • 洗碗机

点击这里https://www.energy.gov/eere/buildings/standards-and-test-procedures，获得完整的产品类别信息。如欲确定具体产品是否需要满足上述法规，请与我们联系。

美国电信认可

监管机构 终端附件理事会（ACTA）

法规

需要具备合规声明（DoC）并且符合CFR第68部分的要求。

指导

DOC流程

  • 在认可的测试实验室测试产品的合规性。
  • 编写技术文档。
  • 在产品上加贴标志，并在《用户手册》当中显示FCC通知。
  • 编写并签署DoC。

认证流程

  • 在通讯认证机构开展产品测试工作。
  • 将测试报告连同其他必要文件以及拟建FCC ID编号提交给FCC。
  • 在产品上标注FCC ID编号和合规声明，并在《用户手册》当中声明必要的FCC通知。

需要NRTL批准的产品类型

OSHA 的国家认可测试实验室 (NRTL) 计划

认可私营部门组织对某些产品进行认证，以确保它们符合建筑和一般行业 OSHA 电气标准的要求。每个 NRTL 都有他们认可的测试标准范围，每个 NRTL 使用自己唯一的注册认证标志来指定产品符合适用的产品安全测试标准。认证产品后，NRTL 授权制造商在产品上应用注册认证标志。如果认证是根据 NRTL 计划完成的，则此标志表示 NRTL 对产品进行了测试和认证，并且产品符合一项或多项适当的产品安全测试标准的要求。

美国NRTL国家认可的测试实验室

Current List of NRTLs美国NRTL实验室清单

https://www.osha.gov/nationally-recognized-testing-laboratory-program/current-list-of-nrtls

美国NRTL认可费用表

NRTL Program Fee Schedule – Revised October 19, 2019


Fee Category Fee Activity Fee *

  • Administrative Evaluation Initial application – Limited review $4,160
  • Expansion application – Limited review $2,490
  • Renewal request review $1,660
  • Technical Evaluation Initial application – Detailed management procedures review $8,320
  • Initial or Expansion application - Testing capability review (per standard) $2,490
  • Initial or Expansion application - Site capability review (per site) $2,490
  • Assessment Assessment preparation and close out (per lead auditor, per site) $5,610
  • Assessment preparation and close out (per assistant auditor, per site) $3,320
  • Assessment – per day at office, on-site, or on travel (per auditor, per site) $830 plus travel expenses
  • Federal Register Notices Federal Register notices – initial application $5,500
  • Federal Register notices – renewal or expansion application $3,180
  • Miscellaneous Late Fees $210
  • Other activities or services not specifically described (per hour) $104
  • *All fees must be paid in advance of activity or service

SUBMITTING PAYMENTS Submit the full amount due for the application or for payment of any invoice received from OSHA. All fees must be paid in U.S. dollars by check or money order that is drawn on a U.S.-based institution and made payable to "DOL-OSHA." Mail check or money order, along with any remittance portion of any invoice received, to:

Director, OTPCA U.S Department of Labor - OSHA Room N3655 200 Constitution Avenue, NW Washington, DC 20210 Electronic Payments may also be made via Pay.gov. To request a pay.gov account to make electronic payments, please email nrtlprogram@dol.gov.

美国NRTL计划的测试标准

(NRTL) Program - Appropriate Test Standards 美国NRTL测试标准

以下是确定适用于 OSHA 的 NRTL 计划的测试标准的完整列表。请参阅各个 NRTL 信息网页，以确定这些标准中的哪些属于 NRTL 的认可范围。这些信息网页中显示的测试标准名称在 OSHA 认可特定标准的 NRTL 时生效。

为方便编制列表，我们一般会显示标准制定组织（SDO）使用的测试标准名称。但是，下面显示的许多测试标准都被美国国家标准协会 (ANSI) 批准为美国国家标准。根据我们的程序，被认可为 ANSI 批准的测试标准的 NRTL 可以使用该标准的最新专有版本或最新的 ANSI 版本，无论哪个版本出现在 OSHA 的 NRTL 信息网页下的测试标准列表中。请联系 ANSI 以了解测试标准当前是否已获得 ANSI 批准。

Standard Number Standard Title

  • AAMI ES60601-1:2005/(R)2012 Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance (with amendments)
  • ANSI C37.44 Distribution Oil Cutouts and Fuse Links
  • ANSI FM 3265 Spark Detection and Extinguishing Systems
  • ANSI Z8.1 Commercial Laundry and Drycleaning Equipment and Operations - Safety Requirements
  • ANSI Z21.89 Outdoor Cooking Specialty Gas Appliances
  • ANSI Z83.26 Gas-Fired Outdoor Infrared Patio Heaters
  • ASME A17.5 Elevators and Escalator Electrical Equipment
  • BHMA A156.3 Exit Devices
  • CGA G-2.1 / ANSI K61.1 Storage and Handling of Anhydrous Ammonia (CGA G-2.1)
  • CPLSO-14-2016 Crane Insulators
  • CSA/AM Z21.1 Household Cooking Gas Appliances
  • CSA/AM Z21.5.1 Gas Clothes Dryers-Type 1
  • CSA/AM Z21.5.2 Gas Clothes Dryers-Type 2
  • CSA/AM Z21.10.1 Gas Water Heaters-Automatic Storage Type Water Heaters with Inputs of 70,000 Btu Per Hour or Less
  • CSA/AM Z21.10.3 Water Heaters-Circulating Tank, Instantaneous and Large Automatic Storage Type Water Heaters
  • CSA/AM Z21.11.2 Gas-Fired Room Heaters-Unvented Room Heaters
  • CSA/AM Z21.12 Draft Hoods
  • CSA/AM Z21.13 Gas-Fired Low-Pressure Steam and Hot Water Heating Boilers
  • CSA/AM Z21.15 Manually Operated Gas Valves
  • CSA/AM Z21.17 Domestic Gas Conversion Burners
  • CSA/AM Z21.18 Gas Appliance Pressure Regulators
  • CSA/AM Z21.19 Refrigerators Using Gas Fuel
  • CSA/AM Z21.20 Automatic Gas Ignition Systems and Components
  • CSA/AM Z21.21 Automatic Valves for Gas Appliances
  • CSA/AM Z21.22 Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply System
  • CSA/AM Z21.23 Gas Appliance Thermostats
  • CSA/AM Z21.24 Metal Connectors for Gas Appliances
  • CSA/AM Z21.35 Gas Filters on Appliances
  • CSA/AM Z21.40.1 Gas-Fired Absorption Summer Air Conditioning Appliances
  • CSA/AM Z21.40.2 Gas Fired, Work Activated Air Conditioning and Heat Pump Appliances (Internal Combustion)
  • CSA/AM Z21.41 Quick-Disconnect Devices for Use with Gas Fuel
  • CSA/AM Z21.42 Gas-Fired Illuminating Appliances
  • CSA/AM Z21.47 Gas-Fired Gravity and Forced Air Central Furnaces
  • CSA/AM Z21.50 Vented Gas Fireplaces
  • CSA/AM Z21.54 Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances
  • CSA/AM Z21.56 Gas-Fired Pool Heaters
  • CSA/AM Z21.57 Recreational Vehicle Cooking Gas Appliances
  • CSA/AM Z21.58 Outdoor Cooking Gas Appliances
  • CSA/AM Z21.60 Decorative Gas Appliances for Installation in Vented Fireplaces
  • CSA/AM Z21.66 Automatic Vent Damper Devices for Use With Gas-Fired Appliances
  • CSA/AM Z21.69 Connectors for Movable Gas Appliances
  • CSA/AM Z21.72 Portable Type Gas Camp Stoves
  • CSA/AM Z21.73 Portable Type Gas Camp Lights
  • CSA/AM Z21.74 Portable Refrigerators for Use With HD-5 Propane Gas
  • CSA/AM Z21.76 Gas-Fired Unvented Catalytic Room Heaters for Use With Liquefied Petroleum (LP) Gases
  • CSA/AM Z21.86 Vented Gas-Fired Space Heating Appliance
  • CSA/AM Z21.88 Vented Gas Fireplace Heaters
  • CSA/AM Z83.4 Direct Gas-Fired Make-Up Air Heaters
  • CSA/AM Z83.7 Gas-Fired Construction Heater
  • CSA/AM Z83.8 Gas Unit Heaters
  • CSA/AM Z83.11 Gas Food Service Equipment-Ranges and Unit Broilers
  • CSA/AM Z83.18 Direct Gas Fired Industrial Air Heaters
  • CSA/ANSI C22.2 No. 336 Particular requirements for rechargeable battery-operated commercial robotic floor treatment machines with traction drives
  • FM 1110 Indicator Posts
  • FM 1221 Backflow Preventers
  • FM 1321 Controllers for Electric Motor Driven Fire Pumps
  • FM 1333 Diesel Engine Fire Pump Drivers
  • FM 1635 Plastic Pipe and Fittings for Automatic Sprinkler Systems
  • FM 2000 Automatic Sprinklers for Fire Protection
  • FM 2008 Early Suppression-Fast Response (ESFR) Automatic Sprinklers
  • FM 3010 Approval Standard for Fire Alarm Signaling Systems
  • FM 3210 Heat Detectors for Automatic Fire Alarm Signaling
  • FM 3260 Flame Radiation Detectors for Automatic Fire Alarm Signaling
  • FM 3600 Electrical Equipment for Use in Hazardous (Classified) Locations, General Requirements
  • FM 3610 Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II and III, Division 1 Hazardous (Classified) Locations
  • FM 3611 Electrical Equipment for Use in Class I, Division 2; Class II, Division 2; and Class III, Division 1 and 2 Hazardous Locations
  • FM 3615 Explosion-proof Electrical Equipment, General Requirements
  • FM 3620 Purged and Pressurized Electrical Equipment for Hazardous (Classified) Locations
  • FM 3810 Electrical and Electronic Test, Measuring, and Process Control Equipment
  • FM 3990 Less or nonflammable Liquid-Insulated Transformers
  • FM 5130 Foam Extinguishing Systems
  • FM 6051 Safety Containers and Filing, Supply and Disposal Containers
  • FM 6310 Combustible Gas Detectors
  • FM 7260 Electrostatic Finishing Equipment
  • IEEE C37.09 Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.013 AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.13 Low Voltage AC Power Circuit Breakers Used in Enclosures
  • IEEE C37.14 Low Voltage DC Power Circuit Breakers Used in Enclosures
  • IEEE C37.17 Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers
  • IEEE C37.18 Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery
  • IEEE C37.20.1 Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
  • IEEE C37.20.2 Metal-Clad and Station-Type Cubicle Switchgear
  • IEEE C37.20.3 Metal-Enclosed Interrupter Switchgear
  • IEEE C37.20.4 Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear
  • IEEE C37.20.6 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures
  • IEEE C37.21 Control Switchboards
  • IEEE C37.23 Metal-Enclosed Bus
  • IEEE C37.41 High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C37.42 Distribution Cutouts and Fuse Links
  • IEEE C37.46 Power Fuses and Fuse Disconnecting Switches
  • IEEE C37.47 Distribution Fuse Disconnecting Switches, Fuse Supports, and Current-Limiting Fuses
  • IEEE C37.60 Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems up to 38 kV
  • IEEE C37.66 Oil-Filled Capacitor Switches for Alternating-Current Systems - Requirements
  • IEEE C37.74 Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV Switchgear
  • IEEE C37.90 Relays and Relay Systems Associated with Electric Power Apparatus
  • IEEE C37.121 Unit Substations - Requirements
  • IEEE C37.122 Gas-Insulated Substations
  • IEEE C57.12.00 Distribution, Power and Regulating Transformers - General Requirements
  • IEEE C57.12.20 Overhead-Type Distribution Transformers, 500 kVA and Smaller
  • IEEE C57.12.23 Underground-Type Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; 167 kVA and Smaller
  • IEEE C57.12.24 Underground-Type Three-Phase Distribution Transformers, 2500 kVA and Smaller
  • IEEE C57.12.25 Pad-Mounted Compartmental-Type Self-Cooled Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; 167 kVA and Smaller
  • IEEE C57.12.40 Three Phase Secondary Network Transformers, Subway and Vault Types (Liquid Immersed); 2500 kVA and Smaller
  • IEEE C57.12.44 Secondary Network Protectors
  • IEEE C57.12.50 Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase; and 15 to 500 kVA, Three Phase
  • IEEE C57.12.51 Ventilated Dry-Type Power Transformers 501 kVA and Larger, Three-Phase
  • IEEE C57.12.52 Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase
  • IEEE C57.12.55 Dry-Type Transformers in Unit Installations, Including Unit Substations - Conformance Requirements
  • IEEE C57.13 Instrument Transformers - Requirements
  • IEEE C57.15 Step-Voltage and Induction-Voltage Regulators
  • IEEE C57.21 Shunt Reactors Over 500 kVA
  • IEEE C62.11 Metal Oxide Surge Arresters for AC Power Circuits
  • ISA 12.12.01 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
  • ISA 82.02.02 Electrical Equipment for Measurement, Control and Laboratory Use
  • ISA 60079-0 Explosive Atmospheres - Part 0: Equipment - General Requirements
  • ISA 60079-1 Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures "d"
  • ISA 60079-6 Explosive Atmospheres - Part 6: Equipment Protection by Oil Immersion "o"
  • ISA 60079-7 Explosive Atmospheres - Part 7: Equipment Protection by Increased Safety "e"
  • ISA 60079-11 Explosive Atmospheres - Part 11: Equipment Protection by Intrinsic Safety "i"
  • ISA 60079-15 Explosive Atmospheres - Part 15: Equipment Protection by Type of Protection "n"
  • ISA 60079-25 Standard for Explosive Atmospheres - Part 25: Intrinsically Safe Electrical Systems.
  • ISA 60079-28 Explosive Atmospheres - Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation
  • ISA 60079-31 Explosive Atmospheres - Part 31: Equipment Dust Ignition Protection by Enclosure "t"
  • ISA 61241-0 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations − General Requirements
  • ISA 61241-1 Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Enclosures "tD"
  • ISA 61241-2 Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Pressurization "pD"
  • ISA 61241-11 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Intrinsic Safety "iD"
  • ISA 61241-18 Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Encapsulation "mD"
  • NEMA C12.1 Code for Electricity Meters
  • NEMA C37.50 Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures
  • NEMA C37.51 Metal-Enclosed Low-Voltage AC Power Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures
  • NEMA C37.54 Indoor Alternating-Current High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies-Conformance Test Procedures
  • NEMA C37.55 Metal-Clad Switchgear Assemblies - Conformance Test Procedures
  • NEMA C37.57 Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing
  • NEMA C37.58 Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear - Conformance Test Procedures
  • NFPA 12 Carbon Dioxide Extinguishing Systems
  • NFPA 12a Halon 1301 Fire Extinguishing Systems
  • NFPA 13 Installation of Sprinkler Systems
  • NFPA 16 Installation of Foam Water Sprinkler and Foam-Water Spray Systems
  • NFPA 17 Dry Chemical Extinguishing Systems
  • NFPA 496 Purged and Pressurized Enclosures for Electrical Equipment
  • TIA 4950 Requirements for Battery-Powered, Portable Land Mobile Radio Applications in Class I, II, and III, Division 1, Hazardous (Classified) Locations
  • UL 1 Flexible Metal Conduit
  • UL 4 Armored Cable
  • UL 5 Surface Metal Raceways and Fittings
  • UL 5A Nonmetallic Surface Raceways and Fittings
  • UL 5B Strut-Type Channel Raceways and Fittings
  • UL 5C Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits
  • UL 6 Rigid Metal Conduit
  • UL 6A Electrical Rigid Metal Conduit - Aluminum, Bronze, and Stainless Steel
  • UL 8 Foam Fire Extinguishers
  • UL 10A Tin-Clad Fire Doors
  • UL 10B Fire Tests of Door Assemblies
  • UL 10C Positive Pressure Fire Tests of Door Assemblies
  • UL 13 Power-Limited Circuit Cables
  • UL 14B Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors
  • UL 14C Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly or In Pairs
  • UL 17 Vent or Chimney Connector Dampers for Oil-Fired Appliances
  • UL 20 General-Use Snap Switches
  • UL 21 LP-Gas Hose
  • UL 22 Amusement and Gaming Machines
  • UL 25 Meters for Flammable and Combustible Liquids and LP-Gas
  • UL 25A Standard for Meters for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)
  • UL 25B Meters for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
  • UL 30 Metal Safety Cans
  • UL 33 Heat Responsive Links for Fire-Protection Service
  • UL 38 Manually Actuated Signalling Boxes for Use With Fire Protective Signalling Systems
  • UL 44 Rubber-Insulated Wires and Cables
  • UL 48 Electric Signs
  • UL 50 Enclosures for Electrical Equipment
  • UL 50E Enclosures for Electrical Equipment, Environmental Considerations
  • UL 51 Power-Operated Pumps for Anhydrous Ammonia and LP-Gas
  • UL 58 Steel Underground Tanks for Flammable and Combustible Liquids
  • UL 62 Flexible Cord and Fixture Wire
  • UL 65 Electric Wired Cabinets
  • UL 66 Fixture Wire
  • UL 67 Electric Panelboards
  • UL 69 Electric Fence Controllers
  • UL 73 Electric-Motor-Operated Appliances
  • UL 79 Power-Operated Pumps for Petroleum Product Dispensing Systems
  • UL 79A Standard for Power-Operated Pumps for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)
  • UL 79B Standard for Power-Operated Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
  • UL 80 Steel Inside Tanks for Oil Burner Fuel
  • UL 82 Electric Gardening Appliances
  • UL 83 Thermoplastic-Insulated Wires and Cables
  • UL 87 Power-Operated Dispensing Devices for Petroleum Products
  • UL 87A Standard for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)
  • UL 87B Power-Operated Dispensing Devices for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
  • UL 92 Fire Extinguisher and Booster Hose
  • UL 98 Enclosed and Dead-Front Switches
  • UL 104 Elevator Door Locking Devices and Contacts
  • UL 109 Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
  • UL 122 Photographic Equipment
  • UL 123 Oxy-Fuel Gas Torches
  • UL 125 Valves for Anhydrous Ammonia and LP-Gas (Other Than Safety Relief)
  • UL 130 Electric Heating Pads
  • UL 132 Safety Relief Valves for Anhydrous Ammonia and LP-Gas
  • UL 141 Garment Finishing Appliances
  • UL 142 Steel Aboveground Tanks for Flammable and Combustible Liquids
  • UL 144 Pressure Regulating Valves for LP-Gas
  • UL 147 LP- and MPS-Gas Torches
  • UL 147A Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies
  • UL 147B Nonrefillable (Disposable) Type Metal Container Assemblies for Butane
  • UL 150 Antenna Rotators
  • UL 153 Portable Electric Lamps
  • UL 154 Carbon Dioxide Fire Extinguishers
  • UL 155 Tests for Fire Resistance of Vault and File Room Doors
  • UL 162 Foam Equipment and Liquid Concentrates
  • UL 174 Household Electric Storage-Tank Water Heaters
  • UL 180 Liquid-Level Indicating Gauges and Tank-Filling Signals for Petroleum Products
  • UL 181 Factory-Made Air Ducts and Air Connectors
  • UL 183 Manufactures Wiring Systems
  • UL 193 Alarm Valves for Fire-Protection Service
  • UL 194 Gasketed Joints for Ductile-Iron Pipe and Fittings for Fire Protection Service
  • UL 197 Commercial Electric Cooking Appliances
  • UL 198M Mine-Duty Fuses
  • UL 199 Automatic Sprinklers for Fire-Protection Service
  • UL 201 Standard for Garage Equipment
  • UL 203 Pipe Hanger Equipment for Fire-Protection Service
  • UL 209 Cellular Metal Floor Electrical Raceways and Fittings
  • UL 213 Rubber Gasketed Fittings for Fire-Protection Service
  • UL 217 Single and Multiple Station Smoke Detectors
  • UL 218 Fire Pump Controllers
  • UL 228 Door Closers-Holders, and Integral Smoke Detectors
  • UL 231 Electrical Power Outlets
  • UL 234 Low Voltage Lighting Fixtures for Use in Recreational Vehicles
  • UL 244A Solid-State Controls for Appliances
  • UL 248-1 Low-Voltage Fuses - Part 1: General Requirements
  • UL 248-2 Low-Voltage Fuses - Part 2: Class C Fuses
  • UL 248-3 Low-Voltage Fuses - Part 3: Class CA and CB Fuses
  • UL 248-4 Low-Voltage Fuses - Part 4: Class CC Fuses
  • UL 248-5 Low-Voltage Fuses - Part 5: Class G Fuses
  • UL 248-6 Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
  • UL 248-7 Low-Voltage Fuses - Part 7: Class H Renewable Fuses
  • UL 248-8 Low-Voltage Fuses - Part 8: Class J Fuses
  • UL 248-9 Low-Voltage Fuses - Part 9: Class K Fuses
  • UL 248-10 Low-Voltage Fuses - Part 10: Class L Fuses
  • UL 248-11 Low-Voltage Fuses - Part 11: Plug Fuses
  • UL 248-12 Low-Voltage Fuses - Part 12: Class R Fuses
  • UL 248-13 Low-Voltage Fuses - Part 13: Semiconductor Fuses
  • UL 248-14 Low-Voltage Fuses - Part 14: Supplemental Fuses
  • UL 248-15 Low-Voltage Fuses - Part 15: Class T Fuses
  • UL 248-16 Low-Voltage Fuses - Part 16: Test Limiters
  • UL 250 Household Refrigerators and Freezers
  • UL 252 Compressed Gas Regulators
  • UL 252A Compressed Gas Regulator Accessories
  • UL 260 Dry Pipe and Deluge Valves for Fire-Protection Service
  • UL 262 Gate Valves for Fire-Protection Service
  • UL 268 Smoke Detectors for Fire Protective Signalling Systems
  • UL 268A Smoke Detectors for Duct Application
  • UL 283 Air Fresheners and Deodorizers
  • UL 291 Automated Teller Systems
  • UL 294 Access Control System Units
  • UL 296 Oil Burners
  • UL 296A Waste Oil-Burning Air-Heating Appliances
  • UL 299 Dry Chemical Fire Extinguishers
  • UL 300 Fire Testing of Fire Extinguishing Systems for Protection of Restaurant Cooking Areas
  • UL 305 Panic Hardware
  • UL 307A Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
  • UL 307B Gas Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
  • UL 310 Electrical Quick-Connect Terminals
  • UL 312 Check Valves for Fire-Protection Service
  • UL 325 Door, Drapery, Gate, Louver, and Window Operators and Systems
  • UL 330 Gasoline Hose
  • UL 331 Strainers for Flammable Fluids and Anhydrous Ammonia
  • UL 346 Waterflow Indicators for Fire Protective Signaling Systems
  • UL 347 High-Voltage Industrial Control Equipment
  • UL 347A Medium Voltage Power Conversion Equipment
  • UL 353 Limit Controls
  • UL 355 Electric Cord Reels
  • UL 360 Liquid Tight Flexible Steel Conduit
  • UL 363 Knife Switches
  • UL 365 Police Station Connected Burglar Alarm Units and Systems
  • UL 372 Primary Safety Controls for Gas- and Oil-Fired Appliances
  • UL 378 Draft Equipment
  • UL 385 Play Pipes for Water Supply Testing in Fire Protection Service
  • UL 391 Solid-Fuel and Combination-Fuel Control and Supplementary Furnaces
  • UL 393 Indicating Pressure Gauges for Fire Protection Service
  • UL 399 Drinking-Water Coolers
  • UL 404 Gauges, Indicating Pressure, for Compressed Gas Service
  • UL 407 Manifolds for Compressed Gases
  • UL 412 Refrigeration Unit Coolers
  • UL 414 Electrical Meter Sockets
  • UL 416 Refrigerated Medical Equipment
  • UL 427 Refrigerating Units
  • UL 429 Electrically Operated Valves
  • UL 430 Electric Waste Disposers
  • UL 441 Standard for Gas Vents
  • UL 443 Steel Auxiliary Tanks for Oil-Burner Fuel
  • UL 444 Communications Cables
  • UL 448 Pumps for Fire Protection Service
  • UL 448B Residential Fire Pumps Intended for One- and Two-Family Dwellings and Manufactured Homes
  • UL 448C Stationary, Rotary-Type, Positive-Displacement Pumps for Fire Protection Service
  • UL 452 Antenna Discharge Units
  • UL 458 Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts
  • UL 464 Audible Signal Appliances
  • UL 466 Electric Scales
  • UL 467 Electrical Grounding and Bonding Equipment
  • UL 469 Musical Instruments and Accessories
  • UL 471 Commercial Refrigerators and Freezers
  • UL 474 Dehumidifiers
  • UL 482 Portable Sun/Heat Lamps
  • UL 484 Room Air Conditioners
  • UL 486A-486B Wire Connectors
  • UL 486C Splicing Wire Connectors
  • UL 486D Insulated Wire Connectors for Use With Underground Conductors
  • UL 486E Equipment Wiring Terminals for Use With Aluminum and/or Copper Conductors
  • UL 486F Bare and Covered Ferrules
  • UL 489 Molded-Case Circuit Breakers and Circuit-Breaker Enclosures
  • UL 489A Standard for Circuit Breakers for Use in Communications Equipment
  • UL 489B Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures For Use With Photovoltaic (PV) Systems
  • UL 493 Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables
  • UL 495 Power-Operated Dispensing Devices for LP-Gas
  • UL 496 Edison-Base Lampholders
  • UL 497 Protectors for Communication Circuits
  • UL 497A Secondary Protectors for Communication Circuits
  • UL 497B Protectors for Data Communication and Fire Alarm Circuits
  • UL 497C Protectors for Coaxial Communications Circuits
  • UL 498 Attachment Plugs and Receptacles
  • UL 498A Current Taps and Adapters
  • UL 498C Flatiron and Appliance Plugs
  • UL 499 Electric Heating Appliances
  • UL 506 Specialty Transformers
  • UL 507 Electric Fans
  • UL 508 Electric Industrial Control Equipment
  • UL 508A Industrial Control Panels
  • UL 508C Power Conversion Equipment
  • UL 510 Insulating Tape
  • UL 514A Metallic Outlet Boxes, Electrical
  • UL 514B Fittings for Conduit and Outlet Boxes
  • UL 514C Nonmetallic Outlet Boxes, Flush-Device Boxes and Covers
  • UL 514D Cover Plates for Flush-Mounted Wiring Devices
  • UL 515 Electrical Resistance Heat Tracing for Commercial and Industrial Applications
  • UL 521 Heat Detectors for Fire Protective Signaling Systems
  • UL 525 Flame Arresters for Use on Vents of Storage Tanks for Petroleum Oil and Gasoline
  • UL 536 Flexible Metallic Hose
  • UL 539 Single and Multiple Station Heat Detectors
  • UL 541 Refrigerated Vending Machines
  • UL 542 Lampholders, Starters, and Starter Holders for Fluorescent Lamps
  • UL 551 Transformer-Type Arc-Welding Machines
  • UL 555 Fire Dampers
  • UL 555S Leakage Rated Dampers for Use in Smoke Control Systems
  • UL 558 Industrial Trucks, Internal Combustion Engine-Powered
  • UL 561 Floor Finishing Machines
  • UL 563 Ice Makers
  • UL 565 Liquid Level Gauges and Indicators for Anhydrous Ammonia and LP-Gas
  • UL 567 Pipe Connectors for Flammable and Combustible Liquids and LP-Gas
  • UL 567A Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)
  • UL 567B Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
  • UL 568 Nonmetallic Cable Tray Systems
  • UL 569 Pigtails and Flexible Hoses
  • UL 574 Electric Oil Heater
  • UL 583 Electric-Battery-Powered Industrial Trucks
  • UL 588 Christmas-Tree and Decorative-Lighting Outfits
  • UL 603 Power Supplies for Use With Burglar-Alarm Systems
  • UL 606 Linings and Screens for Use with Burglar-Alarm Systems
  • UL 609 Local Burglar-Alarm Units and Systems
  • UL 621 Ice Cream Makers
  • UL 626 2-1/2 Gallon Stored Pressure Water Type Fire Extinguishers
  • UL 634 Connectors and Switches for Use With Burglar-Alarm Systems
  • UL 635 Insulating Bushings
  • UL 636 Holdup Alarm Units and Systems
  • UL 639 Intrusion-Detection Units
  • UL 641 Type L Low-Temperature Venting Systems
  • UL 644 Container Assemblies for LP-Gas
  • UL 651 Schedule 40 and 80 Rigid PVC Conduit
  • UL 651A Type EB and A Rigid PVC Conduit and HDPE Conduit
  • UL 664 Commercial (Class IV) Electric Dry-Cleaning Machines
  • UL 668 Hose Valves For Fire Protection Service
  • UL 674 Electric Motors and Generators for Use in Hazardous (Classified) Locations
  • UL 676 Underwater Lighting Fixtures
  • UL 680 Emergency Vault Ventilators and Vault Ventilating Parts
  • UL 681 Installation and Classification of Mercantile and Bank Burglar-Alarm Systems
  • UL 696 Electric Toys
  • UL 697 Toy Transformers
  • UL 698A Industrial Control Panels Relating to Hazardous (Classified) Locations
  • UL 705 Power Ventilators
  • UL 710 Grease Extractors for Exhaust Ducts
  • UL 711 Rating and Fire Testing of Fire Extinguishers
  • UL 719 Nonmetallic Sheathed Cables
  • UL 726 Oil-Fired Boiler Assemblies
  • UL 727 Oil-Fired Central Furnaces
  • UL 729 Oil-Fired Floor Furnaces
  • UL 730 Oil-Fired Wall Furnaces
  • UL 731 Oil-Fired Unit Heaters
  • UL 732 Oil-Fired Water Heaters
  • UL 733 Oil-Fired Air Heaters and Direct-Fired Heaters
  • UL 745-2-1 Particular Requirements of Drills
  • UL 745-2-5 Particular Requirements for Circular Saws and Circular Knives
  • UL 745-2-14 Particular Requirements for Planers
  • UL 745-2-31 Particular Requirements for Diamond Core Drills
  • UL 745-2-32 Particular Requirements for Magnetic Drill Presses
  • UL 745-2-35 Particular Requirements for Drain Cleaners
  • UL 749 Household Dishwashers
  • UL 751 Vending Machines
  • UL 753 Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service
  • UL 756 Coin and Currency Changers and Actuators
  • UL 763 Motor-Operated Commercial Food Preparing Machines
  • UL 773 Plug-In Locking-Type Photocontrols for Use With Area Lighting
  • UL 773A Nonindustrial Photoelectric Switches for Lighting Control
  • UL 775 Graphic Arts Equipment
  • UL 778 Motor-Operated Water Pumps
  • UL 783 Electric Flashlights and Lanterns for Use in Hazardous Locations, Class I, Group C and D
  • UL 789 Indicator Posts for Fire-Protection Service
  • UL 791 Residential Incinerators
  • UL 795 Commercial-Industrial Gas-Heating Equipment
  • UL 797 Electrical Metallic Tubing
  • UL 797A Electrical Metallic Tubing - Aluminum
  • UL 810 Capacitors
  • UL 813 Commercial Audio Equipment
  • UL 814 Gas-Tube-Sign and Ignition Cable
  • UL 817 Cord Sets and Power-Supply Cords
  • UL 823 Electric Heaters for Use in Hazardous (Classified) Locations
  • UL 826 Household Electric Clocks
  • UL 827 Central Stations for Watchman, Fire-Alarm, and Supervisory Services
  • UL 834 Heating, Water Supply, and Power Boilers-Electric
  • UL 842 Valves for Flammable Fluids
  • UL 842A Standard for Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)
  • UL 842B Standard for Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
  • UL 844 Electric Lighting Fixtures for Use in Hazardous (Classified) Locations
  • UL 845 Electric Motor Control Centers
  • UL 852 Metallic Sprinkler Pipe for Fire Protection Service
  • UL 854 Service Entrance Cable
  • UL 857 Electric Busways and Associated Fittings
  • UL 858 Household Electric Ranges
  • UL 858A Safety-Related Solid-State Controls for Electric Ranges
  • UL 859 Personal Grooming Appliance
  • UL 860 Pipe Unions for Flammable and Combustible Fluids and Fire Protection Service
  • UL 863 Electric Time-Indicating and -Recording Appliances
  • UL 864 Control Units and Accessories for Fire Alarm Systems
  • UL 867 Electrostatic Air Cleaners
  • UL 869A Reference Standard for Service Equipment
  • UL 870 Wireways, Auxiliary Gutters, and Associated Fittings
  • UL 873 Electrical Temperature-Indicating and -Regulating Equipment
  • UL 875 Electric Dry Bath Heaters
  • UL 879 Electrode Receptacles for Gas-Tube Signs
  • UL 879A LED Sign and Sign Refrofit Kits
  • UL 884 Underfloor Electrical Raceways and Fittings
  • UL 887 Delayed-Action Timelocks
  • UL 891 Dead-Front Electrical Switchboards
  • UL 896 Oil-Burning Stoves
  • UL 913 Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division I, Hazardous (Classified) Locations
  • UL 916 Energy Management Equipment
  • UL 917 Clock-Operated Switches
  • UL 921 Commercial Electric Dishwashers
  • UL 923 Microwave Cooking Appliances
  • UL 924 Emergency Lighting and Power Equipment
  • UL 935 Fluorescent-Lamp Ballasts
  • UL 943 Ground-Fault Circuit Interrupters
  • UL 943B Appliance Leakage-Current Interrupters
  • UL 961 Hobby and Sports Equipment
  • UL 962 Household and Commercial Furnishings
  • UL 962A Furniture Power Distribution
  • UL 963 Sealing, Wrapping, and Marking Equipment
  • UL 964 Electrically Heating Bedding
  • UL 970 Standard for Retail Fixtures and Merchandise Displays
  • UL 977 Fused Power-Circuit Devices
  • UL 979 Water Treatment Appliances
  • UL 982 Motor-Operated Food Preparing Machines
  • UL 984 Hermetic Refrigerant Motor-Compressors
  • UL 985 Household Fire Warning System Units
  • UL 987 Stationary and Fixed Electric Tools
  • UL 991 Tests for Safety-Related Controls Employing Solid-State Devices
  • UL 998 Humidifiers
  • UL 1004-1 Rotating Electrical Machines-General Requirements
  • UL 1004-5 Fire Pump Motors
  • UL 1004-9 Standard for Form Wound and Medium Voltage Rotating Electrical Machines
  • UL 1008 Automatic Transfer Switches
  • UL 1008A Medium-Voltage Transfer Switches
  • UL 1012 Power Supplies
  • UL 1017 Electric Vacuum Cleaning Machines and Blower Cleaners
  • UL 1018 Electric Aquarium Equipment
  • UL 1022 Line Isolated Monitors
  • UL 1023 Household Burglar-Alarm System Units
  • UL 1026 Electric Household Cooking and Food-Serving Appliances
  • UL 1028 Electric Hair-Clipping and -Shaving Appliances
  • UL 1029 High-Intensity Discharge Lamp Ballasts
  • UL 1030 Sheathed Heater Elements
  • UL 1034 Burglary Resistant Electric Locking Mechanisms
  • UL 1037 Antitheft Alarms and Devices
  • UL 1042 Electric Baseboard Heating Equipment
  • UL 1047 Isolated Power Systems Equipment
  • UL 1053 Ground-Fault Sensing and Relaying Equipment
  • UL 1054 Special-Use Switches
  • UL 1058 Halogenated Agent Extinguishing System Units
  • UL 1059 Terminal Blocks
  • UL 1062 Unit Substations
  • UL 1063 Machine-Tool Wires and Cables
  • UL 1066 Low-Voltage AC and DC power Circuit Breakers Used in Enclosures
  • UL 1069 Hospital Signaling and Nurse Call Equipment
  • UL 1072 Medium Voltage Power Cables
  • UL 1076 Proprietary Burglar-Alarm Units and Systems
  • UL 1077 Supplementary Protectors for Use in Electrical Equipment
  • UL 1081 Electric Swimming Pool Pumps, Filters and Chlorinators
  • UL 1082 Household Electric Coffee Makers and Brewing-Type Appliances
  • UL 1083 Household Electric Skillets and Frying-Type Appliances
  • UL 1086 Household Trash Compactors
  • UL 1088 Temporary Lighting Strings
  • UL 1090 Electric Snow Movers
  • UL 1091 Butterfly Valves for Fire Protection Service
  • UL 1203 Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
  • UL 1206 Electric Commercial Clothes-Washing Equipment
  • UL 1230 Amateur Movie Lights
  • UL 1236 Electric Battery Chargers
  • UL 1238 Control Equipment for Use With Flammable Liquid Dispensing Devices
  • UL 1240 Electric Commercial Clothes-Drying Equipment
  • UL 1241 Junction Boxes for Swimming Pool Lighting Fixtures
  • UL 1242 Intermediate Metal Conduit
  • UL 1247 Diesel Engines for Driving Centrifugal Fire Pumps
  • UL 1248 Engine-Generator Assemblies for Use in Recreational Vehicles
  • UL 1254 Pre-Engineered Dry Chemical Extinguishing System Units
  • UL 1261 Electric Water Heaters for Pools and Tubs
  • UL 1277 Electrical Power and Control Tray Cables With Optional Optical-Fiber Members
  • UL 1278 Movable and Wall- or Ceiling-Hung Electric Room Heaters
  • UL 1283 Electromagnetic-Interference Filter
  • UL 1285 Pipe and Couplings, Polyvinyl Chloride (PVC) for Underground Fire Service
  • UL 1286 Office Furnishings
  • UL 1310 Class 2 Power Units
  • UL 1313 Nonmetallic Safety Cans for Petroleum Products
  • UL 1314 Special-Purpose Containers
  • UL 1316 Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products
  • UL 1322 Fabricated Scaffold Planks and Stages
  • UL 1323 Scaffold Hoists
  • UL 1340 Hoists
  • UL 1363 Temporary Power Taps
  • UL 1419 Professional Video and Audio Equipment
  • UL 1424 Cables for Power-Limited Fire-Protective-Signaling Circuits
  • UL 1425 Cables for Non-Power Limited Fire-Alarm Circuits
  • UL 1429 Pullout Switches
  • UL 1431 Personal Hygiene and Health Care Appliances
  • UL 1434 Thermistor-Type Devices
  • UL 1436 Outlet Circuit Testers and Similar Indicating Devices
  • UL 1437 Electrical Analog Instruments, Panelboard Types
  • UL 1447 Electric Lawn Mowers
  • UL 1449 Transient Voltage Surge Suppressors
  • UL 1450 Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment
  • UL 1453 Electric Booster and Commercial Storage Tank Water Heaters
  • UL 1468 Direct-Acting Pressure-Reducing and Pressure-Control Valves for Fire Protection Service
  • UL 1472 Solid-State Dimming Controls
  • UL 1474 Adjustable Drop Nipples for Sprinkler Systems
  • UL 1478 Fire Pump Relief Valves
  • UL 1480 Speakers for Fire Protective Signaling Systems
  • UL 1481 Power Supplies for Fire Protective Signaling Systems
  • UL 1482 Solid-Fuel Type Room Heaters
  • UL 1484 Residential Gas Detectors
  • UL 1486 Quick Opening Devices for Dry Pipe Valves for Fire-Protection Service
  • UL 1492 Audio and Video Equipment
  • UL 1557 Electrically Isolated Semiconductor Devices
  • UL 1558 Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
  • UL 1559 Insect-Control Equipment, Electrocution Type
  • UL 1561 Large General Purpose Transformers
  • UL 1562 Transformers, Distribution, Dry Type-Over 600 Volts
  • UL 1563 Electric Spas, Equipment Assemblies, and Associated Equipment
  • UL 1564 Industrial Battery Chargers
  • UL 1565 Wire Positioning Devices
  • UL 1567 Receptacles and Switches Intended for Use With Aluminum Wire
  • UL 1569 Metal-Clad Cables
  • UL 1573 Stage and Studio Lighting Units
  • UL 1574 Track Lighting Systems
  • UL 1577 Optical Isolators
  • UL 1581 Reference Standard for Electrical Wires, Cables, and Flexible Cords
  • UL 1594 Sewing and Cutting Machines
  • UL 1598 Luminaires
  • UL 1598C Standard for Light Emitting Diode (LED) Retrofit Luminaire Conversion Kits
  • UL 1610 Central-Station Burglar-Alarm Units
  • UL 1626 Residential Sprinklers for Fire Protection Service
  • UL 1635 Digital Burglar Alarm Communicator System Units
  • UL 1637 Home Health Care Signaling Equipment
  • UL 1638 Visual Signaling Appliances
  • UL 1640 Portable Power Distribution Equipment
  • UL 1647 Motor-Operated Massage and Exercise Machines
  • UL 1651 Optical Fiber Cable
  • UL 1653 Electrical Nonmetallic Tubing
  • UL 1655 Community-Antenna Television Cables
  • UL 1660 Liquid-Tight Flexible Nonmetallic Conduit
  • UL 1662 Electric Chain Saws
  • UL 1673 Electric Space Heating Cables
  • UL 1676 Discharge Path Resistors
  • UL 1681 Wiring Device Configurations
  • UL 1682 Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type
  • UL 1690 Data-Processing Cable
  • UL 1691 Single Pole Locking-Type Separable Connectors
  • UL 1693 Electric Radiant Heating Panels and Heating Panel Sets
  • UL 1699 Arc-Fault Circuit-Interrupters
  • UL 1703 Flat Plate Photo Voltaic Modules and Panels
  • UL 1711 Amplifiers for Fire Protective Signaling Systems
  • UL 1713 Pressure Pipe and Coupling, Glass Fiber-Reinforced, for Underground Fire Service
  • UL 1726 Automatic Drain Valves for Standpipe Systems
  • UL 1727 Commercial Electric Personal Grooming Appliances
  • UL 1730 Smoke Detector Monitors and Accessories for Individual Living Units of Multifamily Residences and Hotel/Motel Rooms
  • UL 1738 Venting Systems for Gas-Burning Appliances, Categories II, III, and IV
  • UL 1739 Pilot-Operated Pressure-Control Valves for Fire-Protection Service
  • UL 1740 Industrial Robots and Robotic Equipment
  • UL 1741 Inverters, Converters, and Controllers for Use in Independent Power Systems
  • UL 1767 Early-Suppression Fast-Response Sprinklers
  • UL 1769 Cylinder Valves
  • UL 1773 Termination Boxes
  • UL 1776 High-Pressure Cleaning Machines
  • UL 1778 Uninterruptible Power Supply Equipment
  • UL 1786 Nightlights
  • UL 1795 Hydromassage Bathtubs
  • UL 1812 Ducted Heat Recovery Ventilators
  • UL 1815 Nonducted Heat Recovery Ventilators
  • UL 1821 Thermoplastic Sprinkler Pipe and Fittings for Fire Protection
  • UL 1838 Low Voltage Landscape Lighting Systems
  • UL 1863 Communication Circuit Accessories
  • UL 1876 Isolating Signal and Feedback Transformers for Use in Electronic Equipment
  • UL 1887 Fire Test of Plastic Sprinkler Pipe for Flame and Smoke Characteristics
  • UL 1889 Commercial Filters for Cooking Oil
  • UL 1917 Solid-State Fan Speed Controls
  • UL 1951 Electric Plumbing Accessories
  • UL 1963 Refrigerant Recovery/Recycling Equipment
  • UL 1971 Signaling Devices for the Hearing Impaired
  • UL 1973 Standard for Batteries for Use in Stationary, Vehicle Auxiliary Power and Light Electric Rail (LER) Applications
  • UL 1977 Component Connectors for Use in Data, Signal, Control and Power Applications
  • UL 1981 Central Station Automation Systems
  • UL 1990 Nonmetallic Underground Conduit with Conductors
  • UL 1993 Self-Ballasted Lamps and Lamp Adapters
  • UL 1994 Low-Level Path Marking and Lighting Systems
  • UL 1995 Heating and Cooling Equipment
  • UL 1996 Duct Heaters
  • UL 2006 Halon 1211 Recovery/Recharge Equipment
  • UL 2017 General Purpose Signaling Devices and Systems
  • UL 2021 Fixed and Location-Dedicated Electric Room Heaters
  • UL 2024 Optical Fiber Cable Raceway
  • UL 2034 Single and Multiple Station Carbon Monoxide Detectors
  • UL 2044 Commercial Closed Circuit Television Equipment
  • UL 2054 Standard for Household and Commercial Batteries
  • UL 2061 Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder Assemblies
  • UL 2085 Insulated Aboveground Tanks for Flammable and Combustible Liquids
  • UL 2089 Vehicle Battery Adapters
  • UL 2096 Commercial/Industrial Gas and/or Gas Fired Heating Assemblies with Emission Reduction Equipment
  • UL 2097 Reference Standard for Double Insulation Systems for Use in Electronic Equipment
  • UL 2108 Low Voltage Lighting Systems
  • UL 2111 Overheating Protection for Motors
  • UL 2127 Inert Gas Clean Agent Extinguishing System Unit
  • UL 2129 Standard for Safety for Halocarbon Clean Agent Fire Extinguishers
  • UL 2157 Electric Clothes Washing Machines and Extractors
  • UL 2158 Electric Clothes Dryers
  • UL 2161 Neon Transformers and Power Supplies
  • UL 2166 Halocarbon Clean Agent Extinguishing System Units
  • UL 2200 Stationary Engine Generator Assemblies
  • UL 2202 Electric Vehicle (EV) Charging System Equipment
  • UL 2208 Solvent Distillation Units
  • UL 2225 Cables and Cable Fittings for Use in Hazardous (Classified) Locations
  • UL 2227 Overfilling Prevention Devices
  • UL 2238 Cable Assemblies and Fittings for Industrial Control and Signal Distribution
  • UL 2239 Hardware for the Support of Conduit, Tubing, and Cable
  • UL 2250 Instrumentation Tray Cable
  • UL 2271 Standard for Batteries for Use in Light Electric Vehicle (LEV) Applications
  • UL 2305 Exhibition Display Units, Fabrication and Installation
  • UL 2351 Spray Nozzles for Fire-Protection Service
  • UL 2388 Flexible Lighting Products
  • UL 2420 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 2438 Outdoor Seasonal-Use Cord-Connected Wiring Devices
  • UL 2443 Flexible Sprinkler Hose with Fittings for Fire Protection Service
  • UL 2515 Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
  • UL 2524 In-Building 2-Way Emergency Radio Communication Enhancement Systems
  • UL 2560 Emergency Call Systems for Assisted Living and Independent Living Facilities
  • UL 2572 Mass Notification Systems
  • UL 2577 Suspended Ceiling Grid Low Voltage Systems and Equipment
  • UL 2586 Hose Nozzle Valves
  • UL 2586A Standard for Hose Nozzle Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)
  • UL 2586B Standard for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
  • UL 2594 Standard for Electric Vehicle Supply Equipment
  • UL 2735 Standard for Electric Utility Meters
  • UL 2738 Standard for Induction Power Transmitters and Receivers for Use with Low Energy Products
  • UL 2775 Standard for Fixed Condensed Aerosol Extinguishing System Units
  • UL 3703 Standard for Solar Trackers
  • UL 4248-1 Fuseholders - Part 1: General Requirements
  • UL 4248-4 Fuseholders - Part 4: Class CC
  • UL 4248-5 Fuseholders - Part 5: Class G
  • UL 4248-6 Fuseholders - Part 6: Class 6
  • UL 4248-8 Fuseholders - Part 8: Class J
  • UL 4248-9 Fuseholders - Part 9: Class K
  • UL 4248-11 Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
  • UL 4248-12 Fuseholders - Part 12: Class R
  • UL 4248-15 Fuseholders - Part 15: Class T
  • UL 4248-19 Fuseholders-Part 19: Photovoltaic Fuseholders
  • UL 4703 Standard for Photovoltaic Wire
  • UL 5085-1 Low Voltage Transformers - Part 1: General Requirements
  • UL 5085-2 Low Voltage Transformers - Part 2: General Purpose Transformers
  • UL 5085-3 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
  • UL 6141 Standard for Wind Turbines Permitting Entry of Personnel
  • UL 6142 Small Wind Turbine Systems
  • UL 6420 Equipment Used for System Isolation and Rated as a Single Unit
  • UL 6500 Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use
  • UL 8750 Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products
  • UL 8752 Organic Light Emitting Diode (LED) Panels
  • UL 8753 Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines
  • UL 9540 Standard for Energy Storage Systems and Equipment
  • UL 60065 Audio, Video and Similar Electronic Apparatus
  • UL 60079-0 Explosive Atmospheres - Part 0: Equipment - General Requirements
  • UL 60079-1 Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures "d"
  • UL 60079-2 Explosive Atmospheres - Part 2: Protection by Pressurized Enclosures "p"
  • UL 60079-5 Explosive Atmospheres - Part 5: Equipment Protection by Powder Filling "q"
  • UL 60079-6 Explosive Atmospheres - Part 6: Equipment Protection by Oil Immersion "o"
  • UL 60079-7 Explosive Atmospheres - Part 7: Equipment Protection by Increased Safety "e"
  • UL 60079-11 Explosive Atmospheres - Part 11: Equipment Protection by Intrinsic Safety "i"
  • UL 60079-15 Explosive Atmospheres - Part 15: Equipment Protection by Type of Protection "n"
  • UL 60079-18 Explosive Atmospheres - Part 18: Equipment Protection by Encapsulation "m"
  • UL 60079-25 Explosive Atmospheres - Part 25: Intrinsically Safe Electrical Systems
  • UL 60079-26 Explosive Atmospheres - Part 26: Equipment for Use in Class I, Zone 0 Hazardous (Classified) Locations
  • UL 60079-28 Standard for Explosive Atmospheres - Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation
  • UL 60079-30-1 Standard for Explosive Atmospheres - Part 30-1: Electrical Resistance Trace Heating-General and Testing Requirements
  • UL 60079-31 Standard for Explosive Atmospheres - Part 31: Equipment Dust Ignition Protection Enclosure "t"
  • UL 60320-1 Appliance Couplers for Household and Similar General Purposes-Part 1: General Requirements
  • UL 60335-1 Safety of Household and Similar Electrical Appliances, Part 1: General Requirements
  • UL 60335-2-3 Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons
  • UL 60335-2-8 Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Shavers, Hair Clippers, and Similar Appliances
  • UL 60335-2-24 Safety Requirements for Household and Similar Electrical Appliances, Part 2: Refrigerating Appliances, Ice-Cream Appliances, and Ice-Makers
  • UL 60335-2-34 Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors
  • UL 60335-2-40 Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers
  • UL 60335-2-72 Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use
  • UL 60335-2-89 Household and Similar Electrical Appliances-Safety-Part 2-89: Particular Requirements for Commercial Refrigerating Appliances with an Incorporated or Remote Refrigerant Unit or Compressor
  • UL 60601-1 Medical Electrical Equipment, Part 1: General Requirements for Safety
  • UL 60730-1 Automatic Electrical Controls - Part 1: General Requirements
  • UL 60730-1A Automatic Electrical Controls for Household and Similar Use; Part 1: General Requirements
  • UL 60730-2-2 Automatic Electrical Controls for Household and Similar Use; Part 2 Particular Requirements for Thermal Motor Protectors
  • UL 60730-2-3 Automatic Electrical Controls for Household and Similar Use, Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps
  • UL 60730-2-4 Automatic Electrical Controls for Household and Similar Use, Part 2: Particular Requirements for Thermal Motor Protectors for Motor-Compressors of Hermetic and Semi-Hermetic Type
  • UL 60730-2-5 Automatic Electrical Controls for Household and Similar Use, Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems
  • UL 60730-2-6 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements
  • UL 60730-2-7 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches
  • UL 60730-2-8 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements
  • UL 60730-2-9 Automatic Electrical Controls for Household and Similar Use, Part 2: Particular Requirements for Temperature Sensing Controls
  • UL 60730-2-10A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays
  • UL 60730-2-11A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators
  • UL 60730-2-12A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door Locks
  • UL 60730-2-13A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls
  • UL 60730-2-14 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators
  • UL 60730-2-16A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level Controls
  • UL 60745-1 Hand-Held Motor-Operated Electric Tools-Safety-Part 1: General
  • UL 60745-2-1 Particular Requirements for Drills and Impact Drills
  • UL 60745-2-2 Particular Requirements for Screwdrivers and Impact Wrenches
  • UL 60745-2-3 Particular Requirements for Grinders, Polishers and Disk-Type Sanders
  • UL 60745-2-4 Particular Requirements for Sanders and Polishers Other Than Disk Type
  • UL 60745-2-5 Particular Requirements for Circular Saws
  • UL 60745-2-6 Particular Requirements for Hammers
  • UL 60745-2-8 Particular Requirements for Shears and Nibblers
  • UL 60745-2-9 UL 60745-2-9 Particular Requirements for Tappers
  • UL 60745-2-11 Particular Requirements for Reciprocating Saws
  • UL 60745-2-12 Particular Requirements for Concrete Vibrators
  • UL 60745-2-13 Particular Requirements For Chain Saws
  • UL 60745-2-14 Particular Requirements for Planers
  • UL 60745-2-15 Particular Requirements for Hedge Trimmers
  • UL 60745-2-16 Particular Requirements for Tackers
  • UL 60745-2-17 Particular Requirements for Routers and Trimmers
  • UL 60745-2-18 Particular Requirements for Strapping Tools
  • UL 60745-2-19 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements For Jointers
  • UL 60745-2-20 Particular Requirements for Band Saws
  • UL 60745-2-21 Particular Requirements for Drain Cleaners
  • UL 60745-2-22 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-22: Particular Requirements For Cut-Off Machines
  • UL 60745-2-23 Hand-Held Motor-Operated Electric Tools-Safety-Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools
  • UL 60947-1 Low-Voltage Switchgear and Controlgear - Part 1: General Rules
  • UL 60947-4-1 Standard for Safety Low Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters
  • UL 60947-4-1A Low Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-starters-Electromechanical Contractors and Motor-starters
  • UL 60947-5-1 Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements-Electromechanical Control Circuit Devices
  • UL 60947-5-2 Low-voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches
  • UL 60947-7-1 Low-Voltage Switchgear and Controlgear - Part 7-1: Ancillary Equipment-Terminal Blocks for Copper Conductors
  • UL 60947-7-2 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment-Protective Conductor Terminal Blocks for Copper Conductors
  • UL 60947-7-3 Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment-Safety Requirements for Fuse Terminal Blocks
  • UL 60950 Information Technology Equipment
  • UL 60950-1 Information Technology Equipment Safety - Part 1: General Requirements
  • UL 60950-21 Information Technology Equipment - Safety - Part 21: Remote Power Feeding
  • UL 60950-22 Information Technology Equipment Safety - Part 22: Equipment to be Installed Outdoors
  • UL 60950-23 Information Technology Equipment Safety - Part 23: Large Data Storage Equipment
  • UL 61010-1 Electrical Equipment for Measurement, Control and Laboratory Use; Part 1: General Requirements
  • UL 61010-031 Electrical Equipment for Measurement, Control, and Laboratory Use; Part 031: Safety Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test
  • UL 61010-2-010 Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials
  • UL 61010-2-020 Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-020: Particular Requirements for Laboratory Centrifuges
  • UL 61010-2-030 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular Requirements for Testing and Measuring Circuits
  • UL 61010-2-032 Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held and Hand-Manipulated Current Sensors for Electrical Test and Measurement
  • UL 61010-2-033 Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-033: Particular Requirements for Hand-Held Multimeters for Domestic and Professional Use, Capable of Measuring Mains Voltage
  • UL 61010-2-040 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-040: Particular Requirements for Sterilizers and Washer-Disinfectors Used to Treat Medical Materials
  • UL 61010-2-051 Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring
  • UL 61010-2-061 Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization
  • UL 61010-2-81 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes
  • UL 61010-2-91 Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-091: Particular Requirements for Cabinet X-Ray Systems
  • UL 61010-2-101 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-101: Particular Requirements for In Vitro Diagnostic (IVD) Medical Equipment
  • UL 61010-2-201 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-201: Particular Requirements for Control Equipment
  • UL 61010A-2-042 Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials, and for Laboratory Processes
  • UL 61058-1 Switch for Appliances - Part 1: General Requirements
  • UL 61730-1 Standard for Photovoltaic (PV) Module Safety Qualification-Part 1: Requirements for Construction
  • UL 61730-2 Photovoltaic (PV) Module Safety Qualification-Part 2: Requirements for Testing
  • UL 61800-5-1 Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements - Electrical, Thermal and Energy
  • UL 62109-1 Standard for Safety of Power Converters for Use in Photovoltaic Power Systems - Part 1: General Requirements
  • UL 62275 Cable Management Systems - Cable Ties for Electrical Installations
  • UL 62368-1 Audio/Video, Information and Communication Technology Equipment - Part 1: Safety Requirements
  • UL 62841-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General Requirements
  • UL 62841-2-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery-Part 2-1: Particular Requirements for Hand-Held Drills and Impact Drills
  • UL 62841-2-2 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-2: Particular Requirements For Hand-Held Screwdrivers and Impact Wrenches
  • UL 62841-2-4 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-4: Particular Requirements For Hand-Held Sanders And Polishers Other
  • UL 62841-2-5 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-5: Particular Requirements for Hand-Held Circular Saws
  • UL 62841-2-8 Safety Requirements for Particular Requirements for Hand-Held Shears and Nibblers
  • UL 62841-2-9 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn and Garden Machinery - Safety - Part 2-9: Particular Requirements for Hand-Held Tappers and Threaders
  • UL 62841-2-10 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery-Part 2-10: Particular Requirements for Hand-Held Mixers
  • UL 62841-2-11 Safety Requirements for Particular Requirements for Hand-Held Reciprocating Saws
  • UL 62841-2-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn And Garden Machinery - Safety - Part 2-14: Particular Requirements for Hand-Held Planers
  • UL 62841-2-17 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery-Safety-Part 2-17: Particular Requirements for Hand-Held Routers
  • UL 62841-2-21 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery-Part 2-21: Particular Requirements for Hand-Held Drain Cleaners
  • UL 62841-3-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws
  • UL 62841-3-4 Safety Requirements for Particular Requirements for Transportable Bench Grinders
  • UL 62841-3-6 Safety Requirements for Particular Requirements for Transportable Diamond Drills with Liquid System
  • UL 62841-3-9 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-9: Particular Requirements for Transportable Mitre Saws
  • UL 62841-3-10 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-10: Particular Requirements for Transportable Cut-Off Machines
  • UL 62841-3-13 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery-Part 3-13: Particular Requirements for Transportable Drills
  • UL 62841-4-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn And Garden Machinery-Safety-Part 4-1: Particular Requirements for Chain Saws
  • UL 62841-4-2 Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn And Garden Machinery-Safety-Part 4-2: Particular Requirements for Hedge Trimmers
  • UL 121201 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations

官方网站

https://www.osha.gov/nationally-recognized-testing-laboratory-program

取自“https://iec.wiki/index.php?title=The_United_States_Approval&oldid=5498”